Central Vacuum VacPan Repair Kit

Repair your existing central vacuum VacPan with the DIY (Do It Yourself) VacPan Repair Kit. Repairing your toe kick can be accomplished in under 10 minutes and all that's required is a Phillips head screwdriver.

Contents:

• Toe-kick Lever w/ Nut
• Spring
• Brass Cap
• Long Bolt
• Plastic Sleeve
• Two(2x) Coarse Thread Screws

VacPan Repair Kit Help and Instructions

1. Parts Included

The VacPan repair kit comes with the following part's: Toe kick Lever with a nut installed, spring, brass cap, Long bolt, plastic sleeve, 2 coarse thread screws. You will require a Philips screwdriver for the repair.

2. Removing Original Parts

Remove the original parts. Keep is the plastic washer on the pivot point of the lever shown above.

3. Installing New Hardware

Re-use the plastic washer. Insert the toe kick lever at the front of the VacPan. Hold the nut in place & tighten the long bolt with the plastic washer under it. Set the brass cap on the back post use 1 coarse screw. Position the spring as shown with the plastic sleeve, use the other coarse screw.

4. Verify The Switching Mechanism

Once the hardware is installed and screws are tightened move the toe kick lever to the back and forth. Off should be as shown above.

5. Finished

Repair should be as shown above with the spring making contact with the brass cap.

Buy more central vacuum installation materials