Beam Serenity 325A Central Vacuum System

Beam Central Vacuum 325A 

Beam has sought to add something new to every series of vacuum cleaners placed on the market. The purpose of their Serenity 325A series is to show that the performance of a vacuum cleaner can be enhanced while minimizing the noise levels. The Beam Serenity 325A central vacuum cleaner is one of the four vacuum cleaners of its series. It is the smallest and most compact, being designed for use in smaller homes, condos or townhouses whose total surface does not exceed 3,500 square feet or whose total number of outlets is less than five.

The Serenity 325A series is an upgraded version of the Beam Line series, keeping some of the technical features of those vacuum cleaners but being defined by a set of innovative ones. The first of the innovative features is the Beam patented Quiet Pak sound insulation system. The motors installed on these vacuum cleaners are also upgraded versions of the ones encountered with the Beam Line ones. They produce more air watts, so they perform better. The motor on the Beam Serenity 325A central vacuum cleaner produces 122 CFM of airflow, 550 air watts, its suction power reaches 138 inches and it is a 120-volt and 14.3 amp model.

Then, there is the On-Guard dirt receptacle. The vacuum cleaners of the Serenity QS series are all equipped with anti-microbial collection buckets. Unlike other appliances made by other manufacturers, the Beam Serenity 325A central vacuum cleaner has the AlphaSan anti-microbial agent to prevent the growth of bacteria in its semi-translucent four-gallon bucket. This anti-microbial agent also acts against fungi and other harmful viruses. No bags are used with this vacuum cleaner. Moreover, the design of the 325A vacuum cleaner favors the reduction of threatening particles in the air. The harmful particles are handled by the self-cleaning HEPA filter, whose self-cleaning feature is enabled once the vacuum cleaner shuts down. A motor venting filter is also fitted on the 325 vacuum cleaner in case there are no outdoor exhaustion possibilities. Should this be the case, this filter handles the microscopic particles which would otherwise find their way back into the breathable air.

Additional Information Regarding the Beam 325A Central Vacuum

Another distinctive feature is the anti-vibration mounting system whose aim is to smooth the transition of the vacuum cleaner to a stud. Normally, the back plate of the vacuum is mounted on a piece of wood, but in this case, there is a rubber seal which absorbs the vibrations emitted by the running vacuum cleaner. However, the list of features does not end here, the integrated utility inlet, the ATLIS intake technology, the logic controller also adding to it.